CCTV Camera Pros Geovision 8.2 Multicam Digital Surveillance System User Manual
Page 66
52
Multicast Svr Start / Stop: Appears when a user starts or stops Allows connection to IP
Multicast (one of the remote application) at system startup.
WebCam Svr Start / Stop: Appears when a user starts or stops WebCam Server.
Connect to Center Start / Stop: Appears when GV-System connects or disconnects with the
Security Center.
Twin Svr Start / Stop: Appears when a user starts or stops Twin Server.
Connect to Center V2 Start / Stop: Appears when GV-System logs in or out Center V2.
Connect to VSM Start / Stop/Net Down / Net Resume: Appears when GV-System logs in or
out VSM; when the connection of both fails or resumes.
Connect to SMS Start / Stop / Net Down / Net Resume: Appears when GV-System logs in
or out the SMS server; when the connection of both fails or resumes.
Send Email Alert: Appears when an e-mail alert is sent out.
Send SMS Alert: Appears when an SMS alert is sent out.
Send Hotline Alert: Appears when a Hotline alert is sent out.
Windows Shutdown: Appears when Windows is closed.
Recycle: Appears when GV-System recycles event files to increase storage space.
Auto-Reboot: Appears when Windows is automatically rebooted.
Device: This column shows the individual camera number.
Mode: This column shows whether actions are being taken in local side or remote side.
[Login] This function shows whom and when has logged in and out the GV-System and WebCam
server.
Figure 1-45
ID: Shows the event ID number
Time: This column shows the time when Login event occurs.
User Login: This column shows the ID of the login user.
User Logout: This column shows the ID of the logout user.
Status: This column shows whether login or logout attempts were successful or failed.