beautypg.com

Starting twinserver – CCTV Camera Pros Geovision 8.2 Multicam Digital Surveillance System User Manual

Page 372

background image

358

Starting TwinServer

1. In the Main System, click the Network button, and then select TwinServer. This TwinServer setup

dialog box appears.

Figure 10-6 TwinServer Settings

2. The default port 9650 is for video transmission. Keep it as default or modify it if necessary. Using

UPnP for automatic port configuration to your router, click the Arrow button. For details, see

UPnP Settings in Chapter 6.

3. Select the type of network to be used: Use TCP/IP or Use Multicast. If Use Multicast is enabled,

click the Setting button to display the Multicast Setting dialog box. See Multicast Settings below.

4. Use

the Video Quality Setting slider to adjust video quality for Low, Med, or High.

5. Click

the

Start button to activate the TwinServer.