CCTV Camera Pros Geovision 8.2 Multicam Digital Surveillance System - Manual (Page 127)

Configuring Main System 1
System Idle Protection
The System Idle Protection allows the administrator to work on the system without the worry of logout
or leaving the system not recording anymore.
This feature can automatically logout the administrator, login a user with no access rights and/or start
recording.
91
Auto Logout Administrator
If the administrator does not press the mouse or press a key within a set period of time, the system will
automatically log him/her out.
1. Click the Configure button (No. 14, Figure 1-2), point to General Setting, and then select
System Idle Protection Setting. This dialog box appears.
Figure 1-112
2. Enable the Auto Logout or Switch to Startup Login User if available option, and then select
Supervisor or Supervisor, Poweruser from the drop-down list.
3. In the System Idle Over field, type the idle time from 10 to 300 seconds, after which Supervisor or
Poweruser will be logged out.
113