CCTV Camera Pros Geovision 8.2 Multicam Digital Surveillance System - Manual (Page 390)

376
Editing a User
The Authentication Server operator can create users; can grant, deny, or modify permissions; and can
allow access to local GV-Systems listed in the DVR list.
1. Click the Password Setup button (No.3, Figure 10-24) to display the Password Setup window.
The window is the same as the Password Setup window in Main System, except the following
section.
Figure 10-26 Password Setup
2. To create and edit a user, refer to Setting up Password in Chapter 1.
3. To grant the user access to local DVRs:
a. Click the Group Setting button in the window. The Valid Group List window appears.
b. Click the New Group button. The DVR Group Information window appears.
c. Give a DVR group name, and select the desired DVRs into the group.
d. Go back to the Password Setup window. Use the Valid Group drop-down list to select the
created DVR group.
3b
3c
Figure 10-27 Valid Group List and DVR Group Information
Note: In the Password Setup window of Authentication Server, the Fast Backup & Restore tab is
not available.