CCTV Camera Pros Geovision 8.2 Multicam Digital Surveillance System User Manual
Page 313
Viewing Live Video Using WebCam
6
Activate the GView Function
To allow remote access to the GV-System, you must activate the Webcam server with the Mobile
function enabled. See Figure 6-8.
Connecting to GV-System
Once GView V2 is installed into your PDA, you can use it to monitor your GV-System. Make sure your
PDA has wireless LAN adapter properly in place with access to the Internet.
1. Execute GView V2 in your PDA.
2. Click
the
Connect button located at the lower left corner. This displays the Login screen.
3. Type the IP address of the GV-System you wish to connect, enter a valid username and password,
and then click the OK button.
If logging in successfully, you will see video streaming to your PDA. Clicking the Stop button can exit
the GView application.
Figure 6-56 Starting GView
Figure 6-57 Entering GV-server Info
299