CCTV Camera Pros Geovision 8.2 Multicam Digital Surveillance System - Manual (Page 276)

262
Administrating Host Server
This option allows you to add, edit, and remove a GV Server from the Host drop-down list. The
drop-down list is used to switch the connection to a different GV Server listed inside. Click the Show
System Menu button (No. 5, Figure 6-17), and select Change Server to display the following dialog
box.
The Host
drop-down list
Figure 6-19 Change Server
[Adding Host Server] To add a host server to the drop-down list, click the New button. In Host Name
field, type a name to identify the designated GV Server. Type the IP address or domain name of the GV
Server. Type a valid user name and password with privilege to use this function. Leave all port settings
as defaults at 4550, 5550, and 6550 respectively unless otherwise necessary. Click the OK button.
Then the created GV Server will appear in the drop-down list.
[Editing Host Server] Select the GV Server you wish to edit from the Host drop-down list. All
information of the selected server will be displayed. Change the information in the fields as required
and click the OK button. Then the information is updated and connection is switched to the edited GV
Server.
[Removing Host Server] Select the GV Server you wish to remove from the Host drop-down list, and
then click the Delete button to remove it.