CCTV Camera Pros Geovision 8.2 Multicam Digital Surveillance System User Manual

Page 32

[Motion Detection]

Apply to all camera

Adjust Sensitivity (Level 1-10)

Set mask color

Clear mask

Cut mask

Add mask

Adjust Sensitivity (Level 9-9.9)

Activate Noise Tolerance

Figure 1-12

Motion Sensitivity: There are 10 levels of sensitivity for motion detection. And there are further

sublevels from 9 to 9.9. The default value is set to 9.5. The higher the value, the more sensitive

the system is to the motion.

Mask Filter: Mask instructs the system to ignore movement within the masked area. Mask could

be applied to repetitive motion that should be ignored within the surveillance area, such as street

trees.

Noise Tolerance: This function reduces false alarms and unwanted recordings caused by

weather or light changes without changing video quality. The level of noise tolerance can be

adjusted. For details, see Video Noise Solutions later in this chapter.

[Monitor Control]

Apply to all cameras

Recording Codec

Day-Night Recording Mode

Advanced Codec Setup

Alarm Type

Delay Time Setup

Figure 1-13 Monitor Control Setup

Rec Video: Enable the recording function. Use the drop-down list to select the desired recording

mode: Motion Detect, Round-the-Clock or Day/Night.

For details on Day/Night mode, see Setting Up Day-Night Recording Mode later in this chapter.

~ Recording Codec: Select the method of recording compression for your video: Geo Mpeg4,

Geo Mpeg4-ASP, Geo H264 or Geo H264 V2.

GV Mpeg4-ASP: Provides a smaller compressed file size than Geo Mpeg4. Additionally, it

supports a number of advanced settings that allow experienced users to fine tune the

encoding process. For details, see Geo Mpeg4 (ASP) Advanced Settings later in this chapter.