CCTV Camera Pros Geovision 8.2 Multicam Digital Surveillance System - Manual (Page 430)

416
Controlling a WebCam Server
To disconnect a login user or set the bandwidth limit for a user, right-click the user to have these
options:
Figure 10-65
„ Kick: Disconnects the user from the WebCam server.
„ Bandwidth Setup: Select By Username to specify a bandwidth limit for the user, or select By IP
to limit the bandwidth used by the IP address. A setup dialog box will appear. In this example, an
IP address is selected for bandwidth limit setup. Select Bandwidth Setup, specify a bandwidth
limit, and then click OK.
Figure 10-66