Discovering 3par storage systems, Discovering 3par storage, Systems – HP Storage Essentials Enterprise Edition Software User Manual
Page 86
Discovering Switches, Storage Systems, NAS Devices, and Tape Libraries
48
Discovering 3PAR Storage Systems
To discover a 3PAR storage system, the SMI-S server for the 3PAR storage system must be running.
By default, the 3PAR SMI-S server is not started on the array. To start the SMI-S server, start the
InForm CLI and run the following command:
startcim
This command starts the SMI-S server within a minute or so.
NOTE:
You do not need to provide the interop namespace because the management server
includes the interop namespace for 3PAR storage systems in its default list.
To discover 3PAR storage systems, enter the following information in HP SIM
•
The IP address or system name for the storage system.
•
User name of the storage system.
HP Modular Smart
Array (MSA) storage
systems
Discover the server running the
MSA SMI-S provider.
HP EVA storage
systems
Discover the server running
Command View EVA.
HP XP storage
systems
Discover the server running the
SMI-S provider or the built-in
provider.
IBM storage systems
and System Storage
SAN Volume
Controller
Discover the IBM CIM Agent for the
Storage System or SVC
See
Sun StorEdge 3510 Discovered through proxy software
called Sun StorEdge™
Configuration Service.
See
Sun StorEdge 6920
and 6940
Discover the storage system directly. See
Sun StorEdge 6130 Discover the storage system directly. See
Xiotech storage
systems
Discover the storage system directly. See
Table 7
Discovery Requirements for Storage Systems (continued)
Element
Discovery Requirements
For Additional Information