HP Storage Essentials Enterprise Edition Software - Manual (Page 678)

Chargeback Manager 640
the management server cannot obtain detailed information about the element. If you create a record
for an application, that application is treated as a virtual application.
IMPORTANT: You can easily remove an element's record by clicking the Delete ( ) button. When
you remove an element's record, the management server no longer monitors that element. See
” Deleting Discovered Elements ” on page 79 for more information.
To create a record:
1. Access Chargeback Manager, as described in ” Accessing Chargeback Manager ” on
page 639.
2. Click New.
3. In the Add Asset Record window, enter the following:
• Name
• Vendor
• Model
4. Select one of the following for the type of element:
• Hardware - Host
• Hardware - Storage System
• Hardware - Switch
• Software - Application
5. Click OK.
Changing the Status of an Element
Chargeback Manager helps you track of the status of your elements. Elements that have recently
been discovered are automatically given the status of New. You can then change the status of
elements to In Use, Missing or Repaired. Since the management server cannot determine what you
plan to do with an element, you must change the status manually. However, you can easily change
the status of a group of elements at once.
IMPORTANT: Once you are done with changing the status of your elements, save your settings.
See ” Saving Chargeback Manager Information ” on page 641.
To change the status of an element:
1. Access Chargeback Manager, as described in ” Accessing Chargeback Manager ” on
page 639.
2. Under the Status column, select the status of the element:
• New (Default) - The status of the element has not been set yet.
• Missing - The element cannot be found. It may have been taken off line.
• Repaired - The element is repaired.