Discovering storage systems, 7 discovery requirements for storage systems – HP Storage Essentials Enterprise Edition Software User Manual
Page 85
HP Storage Essentials SRM 6.0 User Guide
47
4.
Click Close to return to the Advanced page.
5.
Paste the copied text into the Custom Properties box.
6.
Make your SNMP trap listener port or SNMP trap community string change in the Custom
Properties box.
Remove the pound (#) symbol in front of the property to make sure it is not commented
out
. For example: cimom.snmpTrapListenerPort=162.
7.
Click Save.
Discovering Storage Systems
Use the workflow in ”
” on page 27 to discover storage systems. This section
provides information about supported storage systems, including the information to enter in HP SIM
during the discovery process. For more information on device support, see the support matrix. The
support matrix is accessible from the Documentation Center (Help > Documentation Center in HP
Storage Essentials).
Table 7
Discovery Requirements for Storage Systems
Element
Discovery Requirements
For Additional Information
3PAR storage
systems
Discover the 3PAR storage system
directly.
EMC CLARiiON
storage systems
The EMC Navisphere CLI is
required for the management server
to communicate with the CLARiiON
storage system.
EMC Symmetrix
storage system
(Including EMC
Symmetrix DMX
storage systems)
Discover the server running the
EMC Solutions Enabler.
LSI storage systems
Can be discovered two ways:
•
Entering the IP address/DNS
name, user name and password
of a controller for an LSI storage
system. Discovers only the
corresponding IP address of the
controller.
•
Entering the IP address/DNS
name, user name and password
of a proxy that is used to
manage an LSI storage system.
Discovers all controllers known
to the proxy.
HDS storage
systems
Discover the server running
HiCommand Device Manager.