21 about performance collectors – HP Storage Essentials Enterprise Edition Software User Manual
Page 256
Configuring the Management Server
218
To apply the filter settings, click Filter to refresh the content of the Report Data Collector page. To
restore the filters to their default settings, click Reset, and refresh the collector page.
In addition to changing the collector schedule after an element has been discovered, you may wish
to decide whether a collector schedule should be started or not for future discovery elements. You
can see the default collector schedule settings using the Default Collector Settings link above the
Filter area, or select Tools > Storage Essentials > Home, and then select Configuration > Discovery,
and click the Collector Settings tab. For more information about the Collector Settings tab, see
Modifying Collector Settings for Newly Discovered Elements
IMPORTANT:
All collectors are stopped during Discovery Data Collection. This means that during
Discovery Data Collection, data is not updated. Historical collectors, such as those available from
the Configuration tab, are restarted when they are stopped during Discovery Data Collection. Any
charts that were active in Performance Manager when Discovery Data Collection was started are
not restarted.
NOTE:
It is not possible to run data collectors on quarantined elements. Attempting to do so will
result in exceptions in the appstorm.
The following table provides details about the Data Collection tab:
Table 21
About Performance Collectors
Column Heading
Description
Element
Displays the name of the element from which this collector gathers
information.
Element Type
Displays the type of element from which the collector gathers
information.
Collector Type
Displays the collector type. Click +Statistics to see the list of
performance statistics that the collector is designed to collect
Enabled
Displays the status of the collector. Collectors that are running display a
check mark in this column.
Interval (Minutes)
Displays the interval in minutes between collector runs.
Next Scheduled
Run
Displays the date and time when the collector is scheduled to run.
Edit
To edit the schedule for running a collector, click the Edit (
) button.
Then set the date and time. For more information, see ”