Removing an element from quarantine, Updating the database with element changes, Removing an – HP Storage Essentials Enterprise Edition Software User Manual
Page 119: Element from quarantine
HP Storage Essentials SRM 6.0 User Guide
81
The elements you quarantine appear with a flag ( ) in the Quarantined column on the
Discovery Data Collection page.
The elements are excluded from discovery until you clear them from quarantine.
Removing an Element from Quarantine
To remove an element from quarantine:
1.
Select the check boxes for the elements you want to remove from quarantine on the Discovery
Data Collection page.
Quarantined elements appear with a flag ( ) in the Quarantined column on the Discovery
Data Collection page.
2.
Click Clear Quarantine.
3.
When you are asked if you want to remove the selected elements from quarantine, click OK.
The next time you perform Discovery Data Collection for the element, the management server
gathers data from the element.
Updating the Database with Element Changes
After you have initially discovered elements, information about them might change. To update the
database with these changes, perform the steps described in this section.
Keep in mind the following:
•
If you are adding, removing or replacing McDATA or Connectrix switches, you must use a
different procedure. For more information, see ”
Managing McDATA and EMC Connectrix
•
Running Discovery Data Collection takes time. You might want to run this process when the
network and the managed elements are not busy.
To update the database:
1.
Select Options > Storage Essentials > Discovery > Run Discovery Data Collection.
2.
Select Include infrastructure details, which gathers information about SAN details.
NOTE:
Include backup details is used for gathering information for Backup Manager. You
do not need to select it unless you have already discovered hosts running backup
applications and installed CIM extensions on those hosts. For more information about
discovering master backup servers, see ”
Step 1 — Discovering Your Hosts and Backup
3.
The management server obtains most of its information from device managers for storage
systems with external databases, such as HP, HDS, and EMC storage systems. Select Force
Device Manager Refresh if you want the management server to tell the device managers for your
storage systems to obtain the latest information. If you do not select Force Device Manager
Refresh, the management server gathers information from the external databases based on the
assumption the information in the external database is up-to-date.