HP Storage Essentials Enterprise Edition Software - Manual (Page 340)

Viewing Element Topology and Properties 302
Menu Options
The remote console also provides the following menu options.
Copying Text from the Remote Console
To copy text from the remote console:
1. Select the text in the remote console.
2. Right-click the top frame in the remote console.
3. Select Copy from the menu.
The text is stored in the buffer of your computer to be pasted elsewhere.
Using External Tools
This section contains the following topics:
• The External Tools Feature , page 301
• Setting up External Tools , page 302.
The External Tools Feature
The management server ships with an external tools feature that lets you:
• Browse the element - Access a host or a switch through its main Web page. The software
assumes the host or switch has a Web page at http://hsIPaddress, where hsIPaddress
is the IP address of the host or switch. To access the main Web page of the host or switch,
right-click the element in System Manager and select External Tools > Browse to 192.168.1.2,
where 192.168.1.2 is the IP address of the host or switch.
• Telnet to the element - Access a host or a switch through the telnet utility. Telnet must be already
enabled on the element. The command uses telnet://hsIPaddress, where hsIPaddress
is the IP address of the host or switch. To telnet to a host or switch, right-click the element in
System Manager and select External Tools > Telnet to 192.168.1.2, where 192.168.1.2 is the IP
address of the host or switch.
Table 41 Menu Options
Option Description
CRLF (Default setting) Provides a carriage return and a linefeed.
Important: Do not use this option when you are using telnet to access
another computer. You must select the CR option after you enter a user
name. To enter a password, if you leave the setting at CRLF, the software
enters a carriage return and a line feed when you click OK. As a result,
no value is entered for the password.
CR Provides a carriage return.
LF Provides a linefeed.