Nortel Networks 1000 - Manual (Page 993)

Configuring the QSDI card 993
Figure 286
QSDI card option switch locations
Software service changes
Once the QPC841 QSDI card has been installed in the system, the
system software needs to be configured to recognize it. This is done
using the Configuration Record programLD 17. Instructions for running
the Configuration Record program are found in Software Input/Output
Reference — Administration (NN43001-611).
Nortel Communication Server 1000
Circuit Card Reference
NN43001-311 02.06 Standard
27 August 2008
Copyright © 2003-2008 Nortel Networks
.