Physical description, Switch settings – Nortel Networks 1000 User Manual
Page 902
![background image](/manuals/193391/902/background.png)
902
NTCK16 Generic Central Office Trunk cards
The cards listed below are minimum vintage required to support the
following countries:
•
NTCK16AA generic Central Office trunk card with PPM
—
Ireland
•
NTCK16BC generic Central Office trunk card without PPM.
—
Brazil
—
Ireland
—
Mexico
—
Tortolla
—
Singapore
•
NTCK16AD generic Central Office trunk card with PPM
—
Turkey
•
NTCK16BD generic Central Office trunk card without PPM.
—
Argentina
—
Turkey
—
Brazil
—
Chile
—
Indonesia
—
Korea
—
Venezuela
Throughout this chapter, cards with PPM are identified by the vintage AX.
Cards without PPM are referenced by the vintage BX.
Physical description
The NTCK16AX and NTCK16BX generic Central Office trunk cards uses
eight units. Each unit connects to the shelf backplane through an 80-pin
connector. The backplane is cabled to the I/O panel which is then cabled
to the cross-connect terminal. At the cross-connect terminal, each unit
connects to external apparatus by Tip and Ring leads.
Switch settings
There are no option switches on the NTCK16AX and NTCK16BX generic
Central Office trunk cards. All settings are configured in software.
Nortel Communication Server 1000
Circuit Card Reference
NN43001-311
02.06
Standard
27 August 2008
Copyright © 2003-2008 Nortel Networks
.