Nortel Networks 1000 - Manual (Page 209)

Installation and configuration 209
Figure 37
Lineside T1 card - connecting two or more cards to the MMI
--End--
Terminal configuration
For the MMI terminal to be able to communicate to the Lineside T1 card,
the interface characteristics must be configured to the following:
• Speed – 1200 or 2400 bps, depending on the setting of switch position
1 of Switch 1
•
Character width – 8 bits
•
Parity bit – none
• Stop bits – one
• Software handshake (XON/XOFF) – off
Nortel Communication Server 1000
Circuit Card Reference
NN43001-311 02.06 Standard
27 August 2008
Copyright © 2003-2008 Nortel Networks
.