Nortel Networks 1000 - Manual (Page 182)

182 NT5D11 and NT5D14 Lineside T1 Interface cards
Figure 31
Lineside T1 card - T1 protocol dip switch locations
T1 framing
The Lineside T1 card is capable of interfacing with CPE or CSU equipment
either in D4 or ESF framing mode. Make the selection for this dip switch
position based on what type of framing the CPE or CSU equipment
supports.
T1 coding
The Lineside T1 card is capable of interfacing with CPE or CSU equipment
using either AMI or B8ZS coding. Make the selection for this dip switch
position based on what type of coding the CPE or CSU equipment
supports.
Nortel Communication Server 1000
Circuit Card Reference
NN43001-311 02.06 Standard
27 August 2008
Copyright © 2003-2008 Nortel Networks
.