Nortel Networks 1000 - Manual (Page 162)

162 NT5D11 and NT5D14 Lineside T1 Interface cards
Card connections
The Lineside T1 card uses the NT8D81AA Tip and Ring cable to connect
from the IPE backplane to the 25-pair amphenol connector on the IPE I/O
input/output (I/O) panel. The I/O panel connector then connects directly
to a T1 line, external alarm, and an MMI terminal or modem using the
NT5D13AA Lineside T1 I/O cable available from Nortel.
Faceplate
The faceplate of the card is twice as wide as the other standard analog
and digital line cards, and occupies two card slots. It comes equipped with
four LED indicators. See
Figure 28 "Lineside T1 card - faceplate" (page
166) .
Figure 27
Lineside T1 card faceplate
Nortel Communication Server 1000
Circuit Card Reference
NN43001-311 02.06 Standard
27 August 2008
Copyright © 2003-2008 Nortel Networks
.