Nortel Networks 1000 - Manual (Page 283)

Clocking Requirement 283
Figure 60 "MGC DECT Clock Reference Cable" (page 283) shows
the MGC DECT Clock Reference Cable. It is used to provide clock
reference between CS1000 Media Gateway Cabinet/chassis.
Figure 60
MGC DECT Clock Reference Cable
Connecting MGC DECT Clock Reference Cable
Step Action
1 Connect the MGC DECT Clock Reference Cable to the AUI port
of the back of the MG1000 chassis.
Figure 61 "MG1000 chassis"
(page 283) shows the AUI port of the MG1000 chassis.
Figure 61
MG1000 chassis
2 In the Option 11C Mini chassis or Succession 1.0 MG chassis,
connect to 15-pin DSUB connector on the back panel formerly
used for the 10Base-T AUI connection.
Figure 62 "Option 11C
Mini chassis or Succession 1.0 MG chassis" (page 284) shows
the 10Base-T AUI connection of the Option 11C Mini chassis or
Succession 1.0 MG chassis.
Nortel Communication Server 1000
Circuit Card Reference
NN43001-311 02.06 Standard
27 August 2008
Copyright © 2003-2008 Nortel Networks
.