Nortel Networks 1000 User Manual

Page 192

192

NT5D11 and NT5D14 Lineside T1 Interface cards

If the Lineside T1 card is installed in an NT8D37 IPE Module, the available
card slots depend on the vintage level module.

Vintage levels cabling 24 ports

For modules with vintage levels that

cabled 24 ports to the I/O panel, the Lineside T1 card can be installed in
any pair of card slots 015.

For modules with vintage levels that cabled 24 ports to the I/O panel, the
Lineside T1 card can be installed in any pair of card slots 015.

Vintage levels cabling 16 ports

For modules with vintage levels that

cabled 16 ports to the I/O panel, the Lineside T1 card can be installed into
the following card slot pairs:

Available:

Motherboard/Daughterboard

0 and 1

1 and 2

4 and 5

7 and 8

8 and 9

9 and 10

12 and 13

13 and 14

The Lineside T1 card cannot be installed into the following card slot pairs:

Restricted:

Motherboard/Daughterboard

2 and 3

3 and 4

6 and 7

10 and 11

11 and 12

14 and 15

If the Lineside T1 card must be installed into one of the restricted card
slot pairs, rewire the IPE module card slot to the I/O panel by installing an
additional NT8D81 cable from the Lineside T1 card motherboard slot to
the I/O panel. Re-arrange the three backplane connectors for the affected
card slots. This permits the connection of the NT5D13AA Lineside T1 card
carrier and maintenance external I/O cable at the IPE module I/O panel
connector for card slots that are otherwise restricted.

Nortel Communication Server 1000

Circuit Card Reference

NN43001-311

02.06

Standard

27 August 2008