Nortel Networks 1000 User Manual
Page 611
Configuration
611
Figure 200
Universal trunk card - jumper locations for NT8D14BA and NT8D14BB Release 9 and below
For most applications, the jumper strap settings remain set to the standard
configuration as shipped from the factory. See
settings - factory standard (NT8D14BA, NT8D14BB)" (page 614)
For CO/FX/WATS or tie trunk loops exceeding 1524 meters (5000 ft.), DID
trunks exceeding a loop resistance of 600 ohms, or RAN trunks operating
in pulse start or level start modes, the jumper strap settings must be
changed as shown in
Table 230 "Jumper strap settings - extended range
(NT8D14BA, NT8D14BB, NT8D14BB Release 10 and up)" (page 615)
.
Nortel Communication Server 1000
Circuit Card Reference
NN43001-311
02.06
Standard
27 August 2008
Copyright © 2003-2008 Nortel Networks
.