Nortel Networks 1000 - Manual (Page 333)

Physical description 333
Cable diagrams
Figure 91 "DDP2 cable for systems with an I/O panel" (page 334) and
Figure 92 "DDP2 cable for systems without an I/O panel" (page
335)
provide examples of typical cabling configurations for the DDP2.
Figure 91 "DDP2 cable for systems with an I/O panel" (page 334) shows a
typical DDP2 cabling for a system with an I/O panel, with the connection
between the I/O panel and a Network Channel Terminating Equipment
(NCTE).
Figure 92 "DDP2 cable for systems without an I/O panel" (page
335)
shows cabling for a system without an I/O panel. Here, the DDP2
faceplate is cabled directly to the NCTE.
Note: Since several clock cabling options exists, none has been
represented in the diagrams. Refer to “Clock configurations” (page
347) for a description on each available option.
Nortel Communication Server 1000
Circuit Card Reference
NN43001-311 02.06 Standard
27 August 2008
Copyright © 2003-2008 Nortel Networks
.