Man-machine e1 maintenance interface software, Description, Man-machine e1 maintenance – Nortel Networks 1000 User Manual
Page 284: Figure 62 "option 11c
284
NT5D33 and NT5D34 Lineside E1 Interface cards
Figure 62
Option 11C Mini chassis or Succession 1.0 MG chassis
3
Use an MGC Breakout Adapter for Option 11C (NTDW63AAE5)
•
Connect the adapter to 25 pairs MDF connector at Slot 0
•
Connect the MGC DECT Clock Reference Cable
(NTDW67AAE5) to 15-pin DSUB connector on the Breakout
Adapter.
Figure 63 "Option 11C Cabinet" (page 284)
shows
the Option 11C Cabinet.
Figure 63
Option 11C Cabinet
--End--
Man-Machine E1 maintenance interface software
Description
The Man-Machine Interface (MMI) provides E1-link diagnostics
and historical information for the LEI system. See
for instructions on how to install the cabling
and configure the terminal for the MMI. The following sections describe
the options available through the LEI’s MMI terminal and explain how to
set-up, configure, and use the MMI.
Nortel Communication Server 1000
Circuit Card Reference
NN43001-311
02.06
Standard
27 August 2008
Copyright © 2003-2008 Nortel Networks
.