Qpc43 peripheral signaling card, Qpc414 network card, Qpc441 3-port extender cards – Nortel Networks 1000 User Manual

Page 101

QPC441 3-Port Extender cards

101

QPC43 Peripheral Signaling card

Options (minimum vintage N)

Plug location

NT5D21 Core/Network module

F13

NT8D35 Network module

QPC414 Network card

Application

Pin connection
J3/S2 and J4/S1

T-1 facilities (including PRI/DTI),* channel service
unit

connect pins 1 and 2
(pin 1 is next to the white dot)

Note: Possible jumper locations for vintage B (for different styles/series):

J3—E11 or H11
J4—H17 or E7
S1 and S2—E33

Note: Possible jumper locations for vintage A (for different styles/series). These cards can only be
used in the option A setting:

J3—H5 or E11
J4—H17 or E7
S1 and S2—E33

Note: Connectors and loop relations:

Even loop: J1 faceplate connector, jumper at J4 or S1
Odd loop: J2 faceplate connector, jumper at J3 or S2

QPC441 3-Port Extender cards

For CS 1000M SGand MG systems, QPC441 vintage F or later must be
used in all modules.

Table 42
QPC441 3PE card installed in the NT4N41CP PII Core Net modules

Jumper Settings: Set Jumper RN27 at E35 to "A".

Switch Settings

Module

D20 switch position

NT4N41 CP Core/Net modules only

Nortel Communication Server 1000

Circuit Card Reference

NN43001-311

02.06

Standard

27 August 2008