Conferencing, 10baset port – Nortel Networks 1000 User Manual
Page 925
![background image](/manuals/193391/925/background.png)
Media Gateway/Media Gateway Expansion card slot assignment
925
Conferencing
Thirty-two conference channels are provided by the NTDK20 SSC card’s
conference devices. Conference capability can be increased by mounting
expansion daughterboards on the NTDK20 SSC card. Each dual IP
daughterboard increases the total number of conference channels by 32.
The maximum number of conference ports is 96.
Each conference device provides 32 ports of conferencing capabilities
(one conference participant for each port). A conference call can
involve three to six participants. For example, there could be six 5-party
conferences on each device, or four 6-party conferences plus two 3-party
conferences. It is not possible to conference between conference devices.
10BaseT port
The Call Server provides one 10BaseT connection to a Local Area
Network (LAN) to interface with Management software applications such
as OTM and CallPilot. The Media Gateway SSC 10BaseT port, Port 1, is
disabled by default. To use the 10BaseT port, the port must be assigned a
unique IP address and the port must be enabled from the Call Server.
The Media Gateway 10BaseT port can run in Normal mode or Survival
mode. In normal mode, the Media Gateway does not provide access to
maintenance or alarm management.
External connections to the 10BaseT port are provided by a 15-pin
connector located on the backplanes of the Call Server and Media
Gateways.
Media Gateway/Media Gateway Expansion card slot assignment
The Media Gateway and Media Gateway Expansion contain physical card
slots, numbered 1 to 10. See
Figure 265 "Media Gateway slots" (page
and
Figure 266 "Media Gateway Expansion slots" (page 927)
When configuring the system, the physical card slot numbers must be
transposed to "logical" card slot numbers. For example, to configure a card
physically located in Slot 2 of the first Media Gateway, use logical Slot
12. To configure a card physically located in Slot 2 of the second Media
Gateway, use logical Slot 22. See
Table 397 "Media Gateway and Media
Gateway Expansion slot assignments" (page 926)
Nortel Communication Server 1000
Circuit Card Reference
NN43001-311
02.06
Standard
27 August 2008
Copyright © 2003-2008 Nortel Networks
.