Table 250 "dx – Nortel Networks 1000 User Manual
Page 680
![background image](/manuals/193391/680/background.png)
680
NT8D15 E and M Trunk card
Table 248
DX signaling - incoming calls with originating party release (cont’d.)
Condition
Current in
signaling lead
State of trunk
detector
Far-end on hook first
Current flow
High
Network taken down and trunk idled
No current flow
High
Near-end on hook first, network taken down
Current flow
Low
Far-end on hook, trunk idled
No current flow
High
Table 249
DX signaling - outgoing calls with originating party release on tandem connections
Condition
Current in
signaling lead
State of trunk
detector
Idle
No current flow
High
Seizure (far-end ready for digits)
Current flow
High
Dial CO/FX/WATS
Current flow
interrupted for each
pulse
High
Stop sender
No current flow
Low
Go sender (universal service provided by
far-end PBX if originating end is senderized)
Current flow
High
CO/FX/WATS offices ready for digits
Stored Office DN digits
Current flow
interrupted for each
pulse
High
Outpulsed
No current flow
Low
Far end answers
No current flow
Low
Far end on hook first
Current flow
High
Near end on hook, network taken down, trunk
idled
No current flow
High
Near end on hook first, network taken down
Current flow
Low
Far end on hook, trunk idled
No current flow
High
Table 250
DX signaling - incoming calls with originating party release on tandem connections
Condition
Current in
signaling lead
State of trunk
detector
Idle
No current flow
High
Nortel Communication Server 1000
Circuit Card Reference
NN43001-311
02.06
Standard
27 August 2008
Copyright © 2003-2008 Nortel Networks
.