Nortel Networks 1000 - Manual (Page 179)

Installation and configuration 179
Table 71
Lineside T1 card - environmental specifications
Parameter Specifications
Operating temperature-normal 15 to +30 C (+59 to 86 F), ambient
Operating temperature-short term 10 to +45 C (+50 to 113 F), ambient
Operating humidity-normal 20% to 55% RH (non-condensing)
Operating humidity-short term 20% to 80% RH (non-condensing)
Storage temperature –50 to +70 C (–58 to 158 F), ambient
Storage humidity 5% to 95% RH (non-condensing)
Table 72 "Lineside T1 card - environmental specifications" (page 179) lists
the environmental specifications of the Lineside T1 card.
Table 72
Lineside T1 card - environmental specifications
Parameter Specifications
Operating temperature-normal 15 to +30 C (+59 to 86 F), ambient
Operating temperature-short term 10 to +45 C (+50 to 113 F), ambient
Operating humidity-normal 20% to 55% RH (non-condensing)
Operating humidity-short term 20% to 80% RH (non-condensing)
Storage temperature –50 to +70 C (–58 to 158 F), ambient
Storage humidity 5% to 95% RH (non-condensing)
Installation and configuration
Installation and configuration of the Lineside T1 card consists of six basic
steps:
Step Action
1 Configure the dip switches on the Lineside T1 card for the
environment.
2 Install the Lineside T1 card into the selected card slots in the
IPE shelf.
3 Cable from the I/O panel to the Customer Premise Equipment
(CPE) or CSU, MMI terminal or modem (optional), external alarm
(optional), and other Lineside T1 cards for daisy chaining use of
MMI terminal (optional).
4 Configure the MMI terminal.
5 Configure the Lineside T1 card through the system software and
verify self-test results.
Nortel Communication Server 1000
Circuit Card Reference
NN43001-311 02.06 Standard
27 August 2008
Copyright © 2003-2008 Nortel Networks
.