Nortel Networks 1000 - Manual (Page 224)

224 NT5D11 and NT5D14 Lineside T1 Interface cards
Table 89
MMI commands and command sets (cont’d.)
Command Description
D C Display Configuration
Displays the configuration settings for the cards including:
•
the serial number of the card
•
MMI firmware version
•
date and time
•
alarm enable/disable setting
•
self-clearing enable/disable setting
•
settings entered in Set Configuration
•
dip switch settings
D H [P] Display History [Pause]
Displays performance counters for the past 24 hours.
D P Display Performance
Displays performance counters for the current hour.
D S [P] Display Status [Pause]
Displays carrier status, including whether the card is in the alarm state, and
what alarm level is currently active.
H or ? Help
Displays the help screen.
L Login
Logs into the MMI terminal when the system has one Lineside T1 card.
Q Quit
Logs the terminal user out. If multiple Lineside T1 cards share a single
terminal, logout after using the MMI. Because of the shared daisy-chained link,
if a Lineside T1 card is logged in, it occupies the bus and no other Lineside T1
cards are able to notify the MMI of alarms.
S A Set Alarm parameters
Alarm parameters include the allowable bit errors per second threshold and
alarm duration.
S C Set Clearing
Sets the alarm self-clearing function to either enable or disable.
S D Set Date
Sets date or verifies current date.
S T Set time
Sets time or verifies current time.
T x Test
Initiates the T1 carrier test function. To terminate a test in process, enter the
STOP TEST (S) command at any time.
Nortel Communication Server 1000
Circuit Card Reference
NN43001-311 02.06 Standard
27 August 2008
Copyright © 2003-2008 Nortel Networks
.