Nortel Networks 1000 - Manual (Page 287)

Man-Machine E1 maintenance interface software 287
For multiple-card installations connected in a daisy chain, it is accessed
by entering
L where the four-digit address is a combination
of the two-digit address of the IPE shelf as set by dip switch positions
on the card Switch 1, positions 3-6, plus the address of the card slot the
motherboard occupies. See
Table 106 "LEI card - NT8D37 IPE module
vintage level port cabling" (page 273) .
For example, to login to a card located in shelf 13, card slot 4, type:
L 13 4
Spaces are inserted between the login command (L), the shelf address,
and the card slot address.
The MMI prompts for a password. The password is "LEILINK," and it
must be typed in all capital letters.
After logging in, the prompt looks like this:
LEI:: > (for single-card installations)
LEI::ss cc> (for multi-card installations, where ss represents the shelf
address and cc represents the card slot address.)
Basic commands
MMI commands can now be executed. The seven basic commands are:
• Help
•
Alarm
•
Clear
• Display
•
Set
•
Test
• Quit
Type ? to list these commands, along with an explanation of
their usage. A screen similar to Figure 64 "HELP (H, ?) screen" (page
288) appears. The help screen also appears by typing H , or
HELP .
Nortel Communication Server 1000
Circuit Card Reference
NN43001-311 02.06 Standard
27 August 2008
Copyright © 2003-2008 Nortel Networks
.