Nortel Networks 1000 - Manual (Page 982)

982 NTVQ01xx Media Card
Figure 282
NTVQ01xx Media Card
The NTVQ01xx Media Card provides faceplate and backplane interfaces,
which are used to connect external LANs. This section provides
information on the faceplate connectors and indicators.
Hardware architecture
The Media Card comes in two versions: 8-port and 32-port.
Faceplate connectors and indicators
Figure 283 "NTVQ01xx Media Card faceplate" (page 983) shows the
NTVQ01xx Media Card faceplate.
Reset switch
The reset switch on the faceplate manually resets the Media Card.
Status LED
The NTVQ01xx Media Card faceplate red LED indicates the following:
• the enabled/disabled status of the card
•
the self-testing result during power up or card insertion into an
operational system
PC card slot
This slot accepts standard PC card flash cards, including ATA Flash
cards (3 Mbit/s to 170 Mbit/s). Nortel supply PCM card adaptors which
enable CompactFlash cards to be used in this slot. This slot is used for
NTVQ01xx Media Card software upgrades, backing up announcements,
and additional storage.
Nortel Communication Server 1000
Circuit Card Reference
NN43001-311 02.06 Standard
27 August 2008
Copyright © 2003-2008 Nortel Networks
.