Grass Valley Maestro Master Control v.2.4.0 - Manual (Page 66)

MAESTRO User Manual 62
2nd Step: Definition
2nd Step: Definition
The 2nd Step: Definition section contains the following steps:
• Category
• Level
• Event Code Definition
Each of these steps is described below.
Category
Categories are a set of classes for inputs and outputs. For example, “SERV,”
“CAM,” “VTR” and so forth.
When the Category table is first opened, use the set panel ( Figure 24 ) to
create a name for the set, and then select the New button (This name will
appear in a pull-down menu on the Input table, as described on page 101 .)
Selecting the New button will display a 20-category table ( Figure 25 ):
Figure 24. Set Panel Figure 25. Category Menu