Grass Valley Maestro Master Control v.2.4.0 - Manual (Page 282)

MAESTRO — User Manual 278
Branding Element Source Assignment
Branding Element Source Assignment
The assignment of an internal Branding element to either a video keyer or
to an audio over mixer is done the same way as assigning an external
routable or direct-connect source. There is no distinction between source
types in the source assignment process from an operational point of view.
Since sources are organized into source categories in the Maestro configu-
ration, branding sources may be categorized in distinct groups for conve-
nience in locating a desired source. For example, these categories could be
Stills, Logos, Animations, Audio or any other logical grouping.
Follow these steps to assign a branding source to a Keyer or an Audio Over
Mixer:
1. Press the Send button on the Source Assignment panel (The Control
panel can be either hardware or GUI). See Figure 170 .
Note Use the Up and Down arrows (on the A and E keys) on the Source Assign-
ment panel if you do not know the categories and entry numbers for a source.
Do NOT press the Send button first. The Up and Down arrows will scroll
through all the available sources. When the preferred source appears in the
window, press an available (that is, a green highlighted) PST button to assign
the source.
Figure 170. Maestro Control Panel’s Source Assignment Sub-Panel
A and E keys