Grass Valley Maestro Master Control v.2.4.0 - Manual (Page 202)

MAESTRO User Manual 198
Selecting Transition Effects
• AudioOnly : This only transitions the audio. The active video effect is
unchanged. The audio that will be on-air after pressing the TAKE button
is selected with the DVE Audio Mode button. Available audio modes are
determined by the “Available Audio Mode” selections explained
below.
• AUX<->PST : This transitions between AUX and PST sources within the
AUX effect window. AUX and PST sources exchange roles.
• SwapPGMAUX : This cut-only transition swaps the contents of the
AUX effect window and the PGM effect window. AUX and PGM
sources exchange roles. The selected transition rate and type are dis-
abled.
• PST>PGM>AUX : This cut-only transition rotates the sources on all
three busses in the direction indicated by the “>.” The selected transi-
tion rate and type are disabled.
• PST : This cut-only transition rotates the sources on all
three busses in the direction indicated by the “<.” The selected transi-
tion rate and type are disabled.
Press the DVE Effect button to cycle through the available exit modes until
you find the desired mode.
If AudioOnly is the selected exit mode, press the DVE Audio Mode button to
change the audio mode for the effect. Pressing Take while in the AudioOnly
effect mode only changes the audio on air with the effect and not the video
effect.