Grass Valley Maestro Master Control v.2.4.0 - Manual (Page 56)

MAESTRO User Manual 52
1st Step: Connections
1st Step: Connections
The 1st Step: Connections section contains the following steps:
• RCS Configuration Server
• RCS Connection
• Network Description
• Serial Connection
Each of these steps is described below.
RCS (Router Control System) Configuration Server
The abbreviation “RCS” refers to the Encore or Jupiter Router Control
System.
Start by clicking the RCS Configuration Server hyperlink. This step will display
the RCS Configuration Server screen. The screen has a table that will define
the RCS information. The features of this table are described below.
Figure 16. RCS Configuration Server Table
Name
Create a name for the RCS server. This is an arbitrary name used only
within the Maestro system.
Type
Select either “Encore” or “Jupiter.”
Note Select the Encore type option for either Encore or Prelude control. Select the
Jupiter type option for Jupiter control.