Grass Valley Maestro Master Control v.2.4.0 - Manual (Page 176)

MAESTRO User Manual 172
Section
2
Basic Maestro Operation
This section describes the basic operation of the Maestro Master Control
System.
Except where noted, the following discussion applies to both the hardware
control panel and the GUI control panel.
Powering Up the System
For Start-up instructions, see Appendix B of the Maestro Installation and
Service Manual.
GUI Control Panel Start Up
Follow these steps to start the GUI Control panel:
1. Boot up the GUI control panel PC.
Note If the PC was purchased as part of the Maestro system, the factory default
login for the administrator is
maestro with password maestro . The
factory default username is user with no password.
2. Click the Maestro GUI Control panel icon. This will display the GUI
control panel.