Grass Valley Maestro Master Control v.2.4.0 - Manual (Page 246)

MAESTRO User Manual 242
Keyer Section
the clip level, that source will have the same clip level whether it is on
Preset or Program. Even if another source is selected, when CG1 is selected
again the selected clip level will still exist unless it is deliberately changed
by the operator.
The key setting memory applies to the following:
• Clip
• Gain
• Self Key (On/off)
When a video source is assigned to a Keyer and one of the settings listed
above is changed, once the key has transitioned to Program or the same key
is assigned with a different source, the setting will remain with that source.
This is true even if the source is replaced on the console–whenever the
source is re-assigned the settings will be applied.
Key Source Assignment Memory (Board Setup Save/Recall)
The current key inputs ("CG1," etc.) can be saved as set. The set is given a
number from 0 to 99, stored, and recalled when needed. See Save Assign-
ment Set (Board Setup Save/Recall)
on page 253 .