Grass Valley Maestro Master Control v.2.4.0 - Manual (Page 105)

101 MAESTRO User Manual
Section 2 — The Maestro Configuration Editor
5th Step: Input/Output Sets
The 5th Step: Input/Output Sets:
• Input
• Interconnection
• GPIO Definition
• Monitor Follow
Each of these steps is described below.
Input
This table defines which router inputs are available to the Maestro, and
specifies the Category and Number button combination that will appear on
the Source Assign keypad.
When the Input table is first opened, create a name for the set, select the
preferred configuration set dependencies, and then select the “New”
option. (The set is assigned to a channel using the Channel Setup table,
page 153 .)
An example of an Input set is shown in Figure 51 . In this example, all inputs
or sources are either External, Embedded, or Direct. See the Enable source
type color coding section of the interface.
Dependencies
Several tables must already exist before continuing:
• Category set - from Maestro 2nd Step Category .
• Level set - from Maestro 2nd Step Level .
• Audio Input Configuration set - from Maestro 3rd Step Audio Input .