Grass Valley Maestro Master Control v.2.4.0 - Manual (Page 195)

191 MAESTRO User Manual
Section 2 — Basic Maestro Operation
Figure 120. Available Wipe Patterns
DVE Effects
In order for DVE effects to be available for selection by the operator, DVE
effects must be defined in the Configuration Editor and assigned to the
channel currently under the control of the control panel. No DVE effect
selection is possible if DVE effects are not defined for the current channel.
DVE effects are selected with the DVE Effect (Macro Effect on some control
panels) and DVE Audio Mode (Macro Select on some control panels) buttons in
the EFFECTS button group. See Figure 121 .
Left to Right Right to Left
Middle Box to Corners Corners to Middle Box
Top to Bottom Bottom to Top
Plus to Corners Corners to Plus
Top/Bottom to Middle Middle to Top/Bottom
Upper Left Box to
Lower Right Upper Right Box to
Lower Left
Left/Right to Middle Middle to Left/Right
Lower Left Box to
Upper Right Lower Right Box to
Upper Left
Upper Left Diagonal
to Lower Right Upper Right Diagonal
to Lower Left Lower Left Diagonal
to Upper Right Lower Right Diagonal
to Upper Left