Grass Valley Maestro Master Control v.2.4.0 - Manual (Page 133)

129 MAESTRO User Manual
Section 2 — The Maestro Configuration Editor
Figure 68. Key Fill Association Table
Key Fill Source
Select the name of the router input supplying the fill for the key.
Key Cut Source
Select the name of the router input supplying the cut signal for the key.
Automation Input
This screen has a table that is used to map input names to index numbers
used by the automation system.
The set is assigned to a channel using the Channel Setup table, as described
on
page 153 .
Dependencies
The Input set Mnemonics under the Input section must be defined to con-
tinue with this step.
Figure 69. Automation Input Table (Example)