Grass Valley Maestro Master Control v.2.4.0 - Manual (Page 204)

MAESTRO User Manual 200
Selecting Configured Independent Transitions
Note Configured independent transitions are defined in the Configuration Editor
and assigned a unique transition association number. These numbers and
their corresponding transition effects must be known to the control panel
operators in order to recall a configured independent transition.
Figure 127. Source Assignment Sub-Panel
Follow these steps for activating an independent transition from the Source
Assignment control panel:
1. Press the Recall button.
2. Press the Trans/D button. The numeric keypad buttons will be
illuminated.
3. Enter the transition association number of the desired independent
transition using the numeric keypad buttons.
Press the Recall Button
Then Press the Trans/D
button to illuminate the
keypad buttons