Grass Valley Maestro Master Control v.2.4.0 - Manual (Page 168)

MAESTRO User Manual 164
9th Step: General
Channel Delegation Sub Panel Configuration Set
Select a previously defined Channel Delegation Sub Panel set ( page 161 ).
GUI Configuration
This table is used to associate a GUI control panel with a Channel Server.
Figure 97. GUI Configuration Table (Example)
GUI Name
Select a name previously defined on the Network Description table
(
page 57 ).
Channel Server Name
Select a name previously defined on the Channel Server table ( page 163 ).
Note If the GUI PC contains a PCI Panel Server card, that Panel server is normally
assigned to the GUI PC. This makes the GUI PC an independent control panel
capable of controlling any channel in its assigned channel delegation set. It is
possible to assign the Panel server from a hardware control panel to the GUI
PC. If this is done, the GUI becomes a slave to the hardware control panel and
exactly mirrors the state of that control panel only. In this case, the GUI PC
would be incapable of independently controlling Maestro channels.
Compiling the Completed Set
After all the configuration tables are created or edited and saved, the con-
figuration file must be compiled before it can be downloaded to the
Maestro hardware and activated as the running configuration using the