Grass Valley Maestro Master Control v.2.4.0 - Manual (Page 355)

351 MAESTRO — User Manual
Section 6 — Visualization Tools
2. Adjust the slider for the X value of y Axis (%) setting under the Rotate
Y section. In the example in
Figure 253 , the AUX (CH1) has been rotated
25% to the right.
3. Adjust the slider for the Angle value under the Rotate Y section. In the
example in
Figure 253 , the angle has been adjusted to 45 degrees.
Translate XYZ
Translation involves picture movement along the X, Y, and Z axis. The
picture is relocated to a different place but does not change in actual size or
shape (
Figure 252 ).
Figure 252. Examples of Translation Settings
1. Adjust the window to the left or right by adjusting the X (%) slider
under the Translate XYZ section either to the left or right. In the
example in
Figure 253 , the X (%) setting has been adjusted to 50 percent.
2. Adjust the window up or down by adjusting the Y (%) slider either left
or right. In the example shown below in
Figure 253 , the Y (%) setting
has been adjusted to 35 percent.
3. Adjust the distance of the window from the screen by adjusting the Z
(%) slider either left or right. In the example in
Figure 253 , the Z (%)
setting has been adjusted to -11 percent.
The changes to the AUX window have been applied. The AUX (CH1)
window or the gold box has been off set to the upper right.
X Axis Translate Y Axis Translate Z Axis Translate
(moved farther away)
Y
Z
X
0865_1
0
Y
Z
X
Y
Z
X