Grass Valley Maestro Master Control v.2.4.0 - Manual (Page 162)

MAESTRO User Manual 158
8th Step: Channel Sets
DVE Set
Select a DVE set as previously defined ( page 135 ).
Automation DVE Association Set
Select an Automation DVE Association set as previously defined.
GPIO Definition Set
Select a GPIO Definition set as previously defined ( page 106 ).
Transition Association Set
Select a Transition Association Set as previously defined ( page 148 ).
Transition Field
Enter the preferred transition field.
Selections are:
• Field 0 - default
• Field 1
• Field both
Cut Transition Rate
Enter the preferred time for a cut transition in Seconds: frames - Default is
0:00 (Immediate cut with no delay)
Fast Transition Rate
Enter the preferred time for a fast transition in Seconds: frames - Default is
0:10 (10 frames).
Medium Transition Rate
Enter the preferred time for a medium transition in Seconds: frames -
Default is 1:00 (1 second).
Slow Transition Rate
Enter the preferred time for a slow transition in Seconds: frames - Default
is 2:00 (2 seconds).