Grass Valley Maestro Master Control v.2.4.0 - Manual (Page 409)

405 MAESTRO User Manual
Section 9 — Emergency Alert System Messaging
The Event Code Definition Table Settings
Note If the Keyer 8 GPI is activated without the EAS device sending a serial mes-
sage, then Keyer 8 will display the text crawl from the last received serial
message.
Figure 312. The Event Code Definition Table
Note This table is for TFT and compatible devices only.
Follow these steps to assign the Event or Severity code for each TFT event
code:
1. Select the preferred Event Code row.
2. Select the preferred Severity from the Severity Level drop-down list.
For example, Test, Watch, or Warning. User defined levels are allowed.
3. Click the OK button and then the Apply button.
4. Save the changes by selecting Save from the File menu (File > Save).
Note Event codes can be added to this table.