Grass Valley Maestro Master Control v.2.4.0 - Manual (Page 154)

MAESTRO User Manual 150
7th Step: Effects Configuration
To configure VBI PassThrough, do the following:
1. In the Configuration Editor, create one or more VBI PassThrough tables
by selecting “VBI PassThrough’ in the “7th Step: Effect Configuration”
area of the Configuration Editor.
Note A different VBI PassThrough definition can be assigned to each Maestro
channel. Create a VBI PassThrough table for each desired VBI PassThrough
definition
2. As VBI PassThrough configuration is dependent upon the video
standard, select the appropriate video standard for the new VBI
PassThrough definition as shown in
Figure 88 .
Note For 1080i 50, Line 8 is not defined.
Figure 88. VBI PassThrough Video Standard Selection
When a VBI PassThrough table is created, a table similar to that illustrated
in
Figure 89 appears.
Note The VBI lines in the selected video standard are represented in the VBI
PassThrough table. Depending on the video standard selected, the VBI
PassThrough table may not be the same as illustrated in
Figure 89 .