Grass Valley Maestro Master Control v.2.4.0 - Manual (Page 213)

209 MAESTRO User Manual
Section 2 — Basic Maestro Operation
Figure 134. Multi-Source Audio Breakaway - Group Selection Screen
The 16 soft buttons (eight on the left side and eight on the right side) are
labeled with the Audio Input Set audio group names associated with the
source selected in
Step above.
4. Select the desired group(s) to be broken away by pressing the black
button next to the desired group name(s).
The group name label soft button for each selected group is highlighted.
Pressing the black button next to an already selected group deselects that
group. As one or more groups are selected, the screen will be similar to the
one shown in
Figure 135 .
Note In the example in Figure 135 , the Main Stereo, Dolby 5.1 and Dolby + 2
groups from the Server 2 source will be broken away and will be switched.
The Spanish and French groups will not be switched.
Monitor
Mix To
Clean
Feed
Mix To
Clean
Feed
Mix To
Clean
Feed
Mix To
Clean
Feed
5.1 Lt-Rt Stereo Mono
Reset Dim - 3 4 . 1 d B
ALM
Options Home
AUDIO CONTROL
ID
1
ID
2
EMRG
BCST
Amin
2
P
S
T
P
G
M
L R Lf Rf C Lfe Ls Rs Lt Rt M M
+2
+1
0 VU
-1
-2
-3
-5
-7
-10
-20
Multi-Source Audio Breakaway
1) Select Breakaway Source:
Button 5 - Server 2
2) Select Breakaway Group(s)
3) Confirm Breakaway by selecting
same Source on desired
Background Bus
Breakaway
Status
Main Stereo
Dolby 5.1
Dolby + 2
Spanish
French