Grass Valley Maestro Master Control v.2.4.0 - Manual (Page 375)

371 MAESTRO User Manual
Section 7 — DVE Option Configuration
Available DVE Effects
The available DVE effect choices are:
• Exit->PGM : This exit mode un-squeezes the source in the squeeze
window (PGM) leaving the PGM video full screen.
• Exit->PST : This exit mode replaces the on-air effect with the video
selected on the PST bus.
• Exit->AUX : This exit mode squeezes the squeeze window (PGM) until
it disappears leaving only the background video (AUX) on screen. At
the end of the transition, AUX video moves to the PGM bus.
• AudioOnly : This exit mode transitions only the audio. The active video
effect is unchanged. The audio that will be on-air after pressing the TAKE
button is selected with the DVE Audio Mode button. Available audio
modes are determined by the “Available Audio Mode” selections
explained below.
• AUX<->PST : This is a transition that replaces the current background
video (AUX) with the video selected on the PST bus.
• SwapPGMAUX : This is a cut-only transition that swaps the back-
ground (AUX) and squeeze window (pgm) video. The selected transi-
tion rate and type are disabled.
• PST>PGM>AUX : This cut-only transition rotates the sources on all
three busses in the direction indicated by the “>.” The selected transi-
tion rate and type are disabled.
• PST : This cut-only transition rotates the sources on all
three busses in the direction indicated by the “>.” The selected transi-
tion rate and type are disabled.
Available Audio Modes
When an effect is active, the audio from one or both on-air video sources
may be selected. The audio mode may be selected before entering the effect
or while the effect is active by selecting the Audio Only exit mode. The
available audio modes include the following:
• PGM : Audio from the PGM source only
• AUX : Audio from the AUX source only
• P/A : PGM audio as an over to AUX audio
• A/P : AUX audio as an over to PGM audio
• P+A : PGM and AUX audio both at full level
Only the audio modes that are selected in the DVE configuration will be
available for selection before entering an effect or as an Audio Only transi-
tion, while in the effect.