Grass Valley Maestro Master Control v.2.4.0 - Manual (Page 260)

MAESTRO User Manual 256
Adding a Panel Server Connection
2. Select the PanelServer IP setting and then click the Alter button
( Figure 153 ).
OR, double-click the PanelServer IP setting.
Figure 153. The Alter Button on the General Properties Dialog
The Active PanelServer dialog will then open.
3. Select the IP address of the preferred Panel server
4. Click the OK button on the lower-left corner of the Active PanelServer
window ( Figure 154 ).
Figure 154. The OK Button on the Active PanelServer Dialog
The General Properties dialog will then appear.