Grass Valley Maestro Master Control v.2.4.0 - Manual (Page 191)

187 MAESTRO User Manual
Section 2 — Basic Maestro Operation
The Fade
(Master fade) button: This button can be used for an emergency
fade to black and silent audio transition.
Figure 114. Transition Buttons
When in black, a new source can be selected using the Program (PGM) but-
tons; this source will appear on the Preset (PST) monitor. To move the new
source to Program, press the Fade button again.
Selecting Transition Effects
Transition effects include wipes and digital video effects (DVE).
Wipes
In order for Wipe effects to be available for selection by the operator, Wipe
effects must be defined in the Configuration Editor application and then be
assigned to the channel that is currently in control of the control panel. No
Wipe effect selection will be possible if Wipe effects are not defined for the
current channel. For more information about defining Wipe transitions, see
the Wipe Transition section of the Maestro Installation and Service manual.
Wipe transitions are selected by using the buttons in the Effect buttons
group, which is shown below in
Figure 115 on page 188 .
204_Other Transition Buttons